Glass Manifestations & Graphics

Enhance Your Glass, Enhance Your Work Environment

Glass Manifestations

Glazing or Glass manifestations can help your business meet safety requirements and comply with building regulations. Large transparent area’s of glass such as full height glass partitions, window glazing and glass doors need to be appropriately marked to prevent staff and visitors from accidentally walking into them.

In line with the Building Regulations this can be accomplished with simple frosted glass manifestations installed onto the window panes by way of marking the glass and making it more visible.

Glass Manifestations can be as simple as having 2 rows of dots or squares at the required height or it could be your logo or just a line. As long as it is clear there is glass present to avoid accidents it can be anything you want to make your business identifiable and enhancing the appearance of your company premises.

Glass Manifestation Dots Squares

Building Regulations

Building Regulations 2000: Document M Building Regulations, cover the safety of glazing. They state that manifestation must be applied to glazing in “critical locations” to increase its visibility and reduce the potential for human impact.

What They State.

2.24 Glass entrance doors and glazed screens will satisfy Requirement M1 or M2 if: 

a. they are clearly defined with manifestation on the glass at two levels, 850 to 1000mm and 1400 to 1600mm above the floor, contrasting visually with the back ground seen through the glass (both from inside and outside) in all lighting conditions;

 b. manifestation takes the form of a logo or sign at least 150mm high (repeated if on a glazed screen), or a decorative feature such as broken lines or continuous bands, at least 50mm high;

Frost Glass Manifestations
Window Graphics
Custom Design Frosted Graphics & Logos - Decorative Glass

Are you wanting to advertise your business on your glass?

Glass Enhance can design, manufacture and install your ideas to take the hassle out of the job for you. There are different ways to go about it, but all you need to do is send us the appropriate artwork, or you can explain what you want and we can come up with some options. Once you're happy we'll get it approved and get it made ready for installation. As we manufacture in-house we can get things turned around very quickly.